BYLFM - 42439 ACRYLIC LACQUER AEROSOL PAINT
- MSDS: BYLFM
- Manufacturer: RAABE CORP
- Product Name: 42439 ACRYLIC LACQUER AEROSOL PAINT
- National Stock Number: 8010-00F045132
Product Identification
Product ID:42439 ACRYLIC LACQUER AEROSOL PAINT
MSDS Date:12/15/1994
FSC:8010
NIIN:00F045132
MSDS Number: BYLFM
Responsible Party
MENOMONEE FALLS, WI 53051
US
Emergency Phone: (414) 255-9500/800-966-7580
Info Phone: 800-966-7580/(414) 255-9500
Cage: OA3L4
Contractor
Telephone: 414-255-9500/800-966-7580
Cage: 0A3L4
Ingredients
TOLUENE (IARC CARC- GROUP 3) *95-3*
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 13%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ALUMINUM (POWDER) *95-3*
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 2%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
ACRYLIC POLYMER
Fraction By Weight: 13%
BUTANE, N-BUTANE
CAS: 106-97-8
RTECS: EJ4200000
Fraction By Weight: 8%
OSHA PEL 800 PPM
ACGIH TLV: 1900 MG/CUM
WET NITROCELLULOSE, NITROCELLULOSE, NITRATE CELLULOSE
CAS: 9004-70-0
RTECS: QW0975200
Fraction By Weight: 2-4%
PROPANE (DIMETHYLMETHANE) *95-3*
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 17%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
SYNTHETIC CRYSTALLINE-FREE SILICA GEL *95-3*
CAS: 112926-00-8
Fraction By Weight: 5%
ACGIH TLV: 10 MG/CUM
STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 2.3-3.4%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
TRIMETHYL BENZENE
CAS: 25551-13-7
RTECS: DC3220000
Fraction By Weight: 2-4%
OSHA PEL 25 PPM
ACGIH TLV: 123 MG/CUM
1,2,4-TRIMETHYLBENZENE *95-3*
CAS: 95-63-6
RTECS: DC3325000
Fraction By Weight: 4%
ACGIH TLV: 25 PPM
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-3*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 20%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
INORGANIC PIGMENTS
Fraction By Weight: 19%
ORGANIC PIGMENTS
2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
CAS: 111-76-2
RTECS: KJ8575000
OSHA PEL 50 PPM (SKIN)
ACGIH TLV: 25 PPM (SKIN)
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 36-37%
OSHA PEL 2400 MG/CUM
ACGIH TLV: 750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 6%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 8%
BUTYL BENZYL PHTHALATE, BBP, BENZYL BUTYL PHTHALATE
CAS: 85-68-7
RTECS: TH9990000
Fraction By Weight: 2%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LIVER DAMAGE, CARDIAC ABNORMALITIES.
REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE. BREATHING/SKIN CONTACT OF METHYL
ETHYL KETONE MAY INCREASE THE POTEN CY OF NEUROTOXINS, SUCH AS
HEXANE, WHENEXPOSURES OCCUR AT THE SAME TIME.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER. SKIN: WASH
THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
CPR IF NEEDED. INGESTION: SINCE PRODUCT MAY CONTAIN MATERIALS WHICH
CAN CAUSE LUN G DAMAGE IF ASPIRATED INTO LUNGS, THE DECISION
WHETHER TO INDUCE VOMITING/NOT MUST BE MADE BY A PHYSICIAN AFTER
CAREFUL CONSIDERATION OF ALL MATERIALS INGESTED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:<-25F
Lower Limits:0.3
Upper Limits:13.1
Extinguishing Media:DRY CHEMICAL, CO2, FOAM.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT W/SCBA. WATER SPRAY
SHOULDN'T BE USED EXCEPT TO KEEP DOWN VAPORS/COOL CLOSED
CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE PREFERRED.
Unusual Fire/Explosion Hazard:AEROSOL CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. VAPORS ARE >THAN AIR & MAY TRAVEL DISTANCE
TO IGNITION SOURCES & FLASHBACK.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA &
ADJACENT LOW LYING AREAS. AVOID BREATHING SOLVENT VAPORS. REMOVE
W/INERT ABSORBANT MATERIALS & NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA W/VENTILATION
SUITABLE FOR STORING MATERIALS. KEEP AWAY FROM HEAT, SPARKS &
FLAMES.
Other Precautions:STORE IN COOL PLACE AWAY FROM DIRECT
SUNLIGHT/IGNITION SOURCES. DON'T STORE AT TEMP >120F.
Exposure Controls
Respiratory Protection:IF WORKPLACE EXPOSURE LIMITS ARE EXCEEDED USE,
NIOSH/OSHA APPROVED RESPIRATOR SUITABLE FOR COMPONENTS.
Ventilation:SUFFICIENT VENTILATION IN VOLUME & PATTERN SHOULD PROVIDED
TO KEEP AIR CONTAMINATION BELOW OSHA/ACGIH TLV LIMITS.
Protective Gloves:CHEMICAL RESISTANT PLASTIC/RUBBER
Eye Protection:CHEMICAL GOGGLES W/SIDE SHIELDS
Other Protective Equipment:FACE SHIELD, IMPERVIOUS CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING/SMOKING. SMOKE IN DESIGNATED AREAS
ONLY.
Supplemental Safety and Health
SPECIAL FIRE CONT'D: WHEN FIGHTING A FIRE INVOLVING ALUMINUM PASTE,
DON'T USE A WATER STREAM/HALOGENATED EXTINGUISHING AGENTS. VOLATILE
BY VOLUME: 91.0-92.2%. INCOMPATIBLITY CONT'D: ALUMINUM FLAKE CAN
ALSO REACT W/SOME ACIDS, CAUSTIC SOLUTIONS.
Chemical Properties
Boiling Pt:B.P. Text:-44-464F
Vapor Density:>1
Spec Gravity:0.7500-0.7800
Evaporation Rate & Reference:FASTER THAN BU AC
Appearance and Odor:OPAQUE LIQUID W/SOLVENT ODOR.
Percent Volatiles by Volume:(SUPP)
Stability
Stability Indicator/Materials to Avoid:YES
ALUMINUM FLAKE CAN REACT VIOLENTY W/HALOGENATED HYDROCARBONS INCLUDING
HALOGENATED FIRE EXTINGUISHING AGENTS. (SEE SUPP)
Stability Condition to Avoid:HEAT, SUNLIGHT, HEATERS, STOVES, SPARKS,
OPEN FLAMES.
Hazardous Decomposition Products:THERMAL: CARBON IOXIDE, CO,
UNIDENTIFIABLE ORGANIC MATERIALS.
Disposal
Waste Disposal Methods:PLACE IN CLOSED CONTAINERS. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.